Sully Station Technologies
Home Store Circuit Library Datasheets

Parts, tools and supplies for the electronics experimenter.

Deluxe Digital Logic Lab

  • The Sully Station Deluxe Digital Logic Lab has everything you need to get started building and experimenting with digital electronics.

    Designed with the beginner in mind, the kit provides a generous assortment of the most commonly used components in digital design. A full-size prototyping breadboard enables you to assemble and test circuits, and safely reuse components again and again.

    The kit is fully supported here at the Sully Station Technologies website with breadboard layouts, schematic diagrams, technical notes and datasheets.

    All parts have been selected for quality from trusted, industry leading brands such as Panasonic, Vishay, Omron and Kingbright to ensure long life and reliable operation. The Deluxe Digital Logic Lab is built around the Texas Instruments 74HCxx series of high-speed CMOS integrated circuits. The kit includes the following genuine Texas Instruments parts:

    • SN74HC00 Quad 2-Input NAND Gate (x2)
    • SN74HC02 Quad 2-Input NOR Gate (x2)
    • SN74HC04 Hex Inverter (x1)
    • SN74HC08 Quad 2-Input AND Gate (x2)
    • SN74HC32 Quad 2-Input OR Gate (x2)
    • SN74HC74 Dual D Flip Flop (x1)
    • SN74HC86 Quad 2-Input XOR Gate (x1)
    • SN74HC139 Dual 2-line to 4-line Decoder (x1)
    • SN74HC153 Dual 4-to-1 Multiplexer (x1)
    • SN74HC161 4-bit Binary Counter (x1)
    • SN74HC595 8-bit Shift Register (x1)

    The Deluxe Digital Logic Lab also includes:

    • PN2222A NPN Transistor (x6)
    • PN2907A PNP Transistor (x6)
    • NE555 Timer (x1)
    • LM7805 Voltage Regulator (x1)
    • 0.01uF Multilayer Ceramic Capacitor (x5)
    • 0.1uF Multilayer Ceramic Capacitor (x5)
    • 10uF Electrolytic Capacitor (x3)
    • 100uF Electrolytic Capacitor (x3)
    • 330ohm Carbon Film Resistor (x10)
    • 1K Carbon Film Resistor (x10)
    • 10K Carbon Film Resistor (x10)
    • 100K Carbon Film Resistor (x10)
    • Green 5V LED (x4)
    • Tactile Push Button Switch (x4)
    • 8-position DIP Switch (x1)
    • 830 Tie Point Breadboard (x1)
    • 70 Piece Cut and Stripped Jumper Wire Pack (x1)
    • AA Battery Holder (x1)
    • 9 volt Battery Clip (x1)